Effects, shaders and filters
Open Kite

Effects, shaders and filters

Kite's Effects list gives any layer drop and inner shadows, layer and background blurs (progressive too), noise, texture, glass and seven colour adjustments. A fill can also be one of 12 moving shaders, one of 12 filters that change a picture, or a video.

Add an effect

Select a layer and press the + beside Effects in the right panel. A menu lists every kind: Inner shadow, Drop shadow, Layer blur, Background blur, Noise, Texture and Glass, then Adjust colours. Pick one and it is added with its starting values.

  • Each effect has a row: click its picture (Effect settings) to open its numbers beside the panel, or its name to change it to another kind.
  • The eye hides an effect for a while; the − removes it. Drag rows to reorder them.
  • Click a row and press ⌘C, then select other layers and press ⌘V, to copy one effect across. To copy a layer's whole look, use Copy properties (⌥⌘C).

Some effects only fit some layers. Noise, texture, glass and progressive blur go on frames, shapes and pictures. A text's shadows follow its letters, and a text has no inner shadow or background blur. A group's shadows follow the shapes in it, without spread.

Drop and inner shadows

A new shadow starts at X 0, Y 4, Blur 4 and Spread 0, in black at 25%. Its settings are those four and Colour. Each number and the colour can take a variable from your design system.

On a layer with a see-through fill, and on a drawing, a drop shadow has Show behind transparent areas: on, the shadow shows through the see-through parts; off, it is cut away under the layer. A shadow shown that way has no spread.

Layer and background blur

  • Layer blur blurs the layer itself and what is in it.
  • Background blur blurs what is behind the layer, for frosted panels and bars. Give the layer a see-through fill to see it.

Both start at 4 px; Blur sets how much.

Progressive blur

On a frame, shape or picture, a blur's settings start with Uniform and Progressive. A progressive blur grows from one side of the layer to the other, for a bar that fades into what scrolls under it, or a photo that softens towards its edge.

  • Start and End: the blur at each end, in px.
  • Direction: Top to bottom, Bottom to top, Left to right or Right to left.
  • While its settings are open, a line on the board runs from where it starts to where it ends. Drag either dot to set it at any angle (hold ⇧ to move in eighths of the layer); the direction then reads As drawn on the board.

Noise

Noise lays a fine grain over the layer's fills, for a printed or filmic look. Its settings:

  • Mono, Duo or Multi: grain in one colour, in two, or in many.
  • Size, how big the grain is, and Density, how much of the layer it covers (100% to start).
  • Colour (and Second for Duo), or Opacity for Multi.
  • Blend: how the grain mixes with the fills under it, with the same blend modes as a layer.

Texture

Texture roughens the layer's edges and what it holds with a grain, as if printed on rough paper or cut from card.

  • X and Y: how big the grain is across and down (4 and 4 to start).
  • Radius: how far it pushes things about, in px.
  • Clip to shape: keeps the layer's outline whole and roughens only what is inside.

Glass

Glass shows what is behind the layer through a pane of glass, bent at its edges and lit along its rim. If the layer has one solid fill, adding glass makes it 10% opaque, so there is something to see through. Put it over a photo, a gradient or words.

  • The light: drag the dial, or type its angle (0° is from the top, −45° to start, the top left) and how bright the rim is (80% to start). Hold ⇧ on the dial to turn it in steps of 15°.
  • Refraction, how much the glass bends what is behind it; Depth, how thick its edge is (0 to 100 px).
  • Dispersion, the colour fringes where it bends; Frost, a blur of what is behind (0 to 50 px); Splay, how far the bending spreads.
The bending and frost are drawn in Chrome, Edge and Kite for Mac and Windows. Safari and Firefox show the glass's fill and rim only.

Colour adjustments

Adjust colours, at the foot of the effect menu, holds seven: Brightness (120% to start), Contrast (120%), Grayscale (100%), Hue rotate (90°), Invert (100%), Saturation (150%) and Sepia (100%). Each has an Amount and, under On, Layer to change the layer itself or Background to change what shows through it. Several can be stacked, in the order of the list.

Effect styles

An effect style saves a layer's whole list of effects under one name, any of the kinds above included. Use the styles button in the Effects heading to apply one, or Create style… to save the current effects as one; change the style and every layer using it follows. Styles live in your design system.

Shader fills

A shader is a fill drawn by your graphics card: a moving gradient or pattern, painted live on the board. Open a fill's window in the Fill section and choose the Shader tab, then click a tile. Each tile moves as it will in your design. Frames, shapes and pictures can have one, one shader per layer.

ShaderGroupWhat it drawsIts own settings
FlowGradientsColours drifting into one anotherFlow, Swirl
AuroraGradientsSoft clouds of colourSoftness
MistGradientsColour sprayed in tall streaksStreak, Softness
SmokeGradientsWisps of ink driftingDetail, Wisp, Contrast
MarblePatternsMarbled paper, veins bent by a warpVeins, Warp, Contrast
DotsPatternsA grid of dotsGrid (Square or Hex), Shape (Circle, Square or Diamond), Size, Gap
BandsPatternsContour lines of colourSteps, Softness
CellsPatternsCells that share walls, a colour eachSize, Gap, Rim
BlobsPatternsDrops that meet and mergeCount, Size
ThreadsPatternsLines bent by a flowing fieldDensity, Flow, Thickness
PixelsScreenA field in coarse pixels and few coloursPixel, Levels, Contrast
SignalScreenSnow, torn rows and scanlines over slow shapesSnow, Tear, Lines

The shader sits among the layer's fills, so a colour under it shows through where it is see-through, and Blend mixes it with them. Wherever a shader can't run, its still stands in: a picture of it, made by Kite and kept up to date as you change it. Exports, file covers, the board zoomed far out, and frames copied to Figma all use the still.

Shader settings

With a shader fill open, its tile is at the top: click it (Change) to pick another and keep the rest. Below:

  • Shuffle: a new palette, new numbers and a new arrangement, at the same speed. Press it until you like one.
  • Parameters: the shader's own settings from the table, then Speed (0 to 4×; 0 holds it still), Scale (10% to 400%), and two finishes over it, Grain (0 to 100%) and Dither (0 to 8 px).
  • Colours: the shader's palette, up to eight colours, with + to add one and − to take one off. Shaders that draw shapes (Dots, Cells, Blobs, Threads) also have Behind, the colour between them.

Every shader loops: it joins itself again without a cut, so it can be filmed or shown on a screen forever.

Filters

A filter is a shader that reads a picture and gives it back changed. Select a picture, open its fill window and choose the Filter tab; each tile shows your own picture filtered. On a frame or shape, a filter reads the picture fill under it. Paper, Glass, Bitmap, CMYK, Lens, Frost and ASCII hold still; Water, VHS, Glitch and Droplets move.

FilterWhat it does to the pictureIts own settings
PaperThe picture printed on a sheet: fibres, folds, a crumpleFibre, Folds, Crumple
GlassSeen through fluted glassShape (Lines, Waves or Zigzag), Ribs, Distortion, Shade, Blur
WaterUnder moving water, light playing on itWaves, Strength, Highlights
BitmapTwo colours, dithered; or its own, in stepsPattern, Size, Steps, Picture colours, Inverted
DotsA halftone of the pictureGrid, Shape, Size, Gap, Picture colours
CMYKPrinted in four inks, each its own screenShape (Dots or Ink), Size, Softness, Contrast
LensThrough a lens: a bulge, colour fringes, a swirlBulge, Fringe, Swirl, Focus
VHSWorn tape: a wave, colour bleed, a tracking band, noise and scanlinesWave, Bleed, Tracking, Noise, Scanlines
GlitchA broadcast tearing: rows shoved sideways, blocks out of place, the colours splitAmount, Slices, Split, Blocks
FrostIce grown over the glass, thickest at the edgesCover, Crystals, Haze, Tint
DropletsRain running down the glass in front of the pictureRain, Size, Fog, Trails
ASCIIThe picture typed out in characters, darker ones where it is darkSize, Contrast, Picture colours, Inverted

Picture colours keeps the photo's own colours instead of the filter's ink. The settings below the filter are the same as a shader's.

Video fills

A frame or a shape can be filled with a video: open a fill's window, choose the Video tab and pick an MP4, WebM or MOV file. The video plays over the layer's other fills and under what it holds, so text and buttons sit on top of it. It fills the layer with the same choices as a picture fill.

On the board it shows its first frame; in its fill window you can play it and scrub through it. In Preview it plays as the Video section in the right panel says: Autoplay, loop and sound. A video of its own, as a layer, is in Drawing tools.

What your agent can set

Every effect here is written as the layer's CSS, so an agent connected to Kite writes the same effects you set by hand, and you edit its work in the same panel. See Working with agents.

  • Shadows, layer and background blurs and colour adjustments, as CSS shadows and filters.
  • Progressive blur, noise, texture and glass, with every setting above.
  • Shader and filter fills by name, with their settings, colours, speed and finishes. An agent can also run a shader backwards, set how long its loop lasts, and add a vignette.
  • Videos, as video layers that play the way you set them.
  • Effect styles in your design system, holding any of the effects.

To take effects out of Kite, see Export and copy: the code you copy keeps them as CSS, and Copy to Figma takes shadows, blurs, noise, texture and glass across as Figma effects. Fills, strokes and type are in Fills, strokes and text.

Related